Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly.

Service:

Katalogseite



The supplied 3D models, pictures and technical drawings are made with reasonable care.
Nevertheless liability is excluded for the accuracy and correctness of this data.

At Stock: Yes

Article ID: 61520900

Scale Price in EUR per PCS:

1
47,3

d [mm]9
D [mm]16
D1 [mm]28
L [mm]24
L1 [mm]14
L2 [mm]28,0
Transmissible Torque T [Nm]28
Transmissible Axial Force Fax [kN]6,5
PW [N/mm²]90
PN [N/mm²]70
Bolts DIN 912 No. of [pcs]2
SizeM4 x 8
M No. [Nm]4
Weight [kg]0,05

Back to overview


Imprint Terms and Conditions Help Privacy notice Index


Facebook YouTube Twitter Instagram Xing LinkedIn